Pinewood Derby Car Store

Order on Pinewood Pro

Please place all orders on Pinewood Pro.

View the full catalog at https://www.pinewoodpro.com/product-list

All ABC products below are currently unavailable. Please order from Pinewood Pro.

Books and Videos Download

Pinewood Derby Speed Secrets

This book goes into the details of what works, and what doesn't and shows you why. Every aspect is covered including body design, weight placement, axle modifications, wheel tuning, alignment and testing.

$5.95 Book Download

Pinewood Derby Speed Secrets

Book + Video

Download both the book and the video for one low price. The video can be played on your computer.

$9.95 Book and Video Download

Pinewood Derby Car Designs Download

It is easy to build our Pinewood Derby cars with these complete step by step instructions. Templates and paint themes included.

THE SPIDER

$4.95 The Spider

POLICE CAR

$4.95 Police Car

GREEN HORNET

$4.95 Green Hornet

MAGNUM

$4.95 Magnum

STARFIGHTER

$4.95 Starfighter

PYTHON

$4.95 Python

The Following Products are Shipped to your Address

Books and Videos

Building eht fastest pinewood derby car book

Building the Fastest Pinewood Derby Car Book

This book if for you if you've been to a few races but you are disappointed in your car's performance.

Includes both speed and building tips.

OUT OF STOCK

Down and Derby movie on DVD

Family Fun that Every Mom, Dad,
and Scout Will Enjoy!

Down and Derby is a fun family comedy about a cub scout Pinewood Derby race that turns an average group of dads into an awkward bunch of competitors.

OUT OF STOCK

Pre-Cut Pinewood Derby Cars

We also have Awana cars. Click here for more.
We do the hard work. All that is left is the sanding and painting.
Weighted version of each car has weights pre-installed so that the car will weigh close to 5 oz when completed.
Weights listed are typical and do not include wheels, axles and paint.
Wheels and axles not included

Terminator

1.1 - 1.5 oz
see close up

LEGO Cars

LEGO plate is attached to a 3/8" high official pinewood derby car block. Standard pinewood derby wheels and axles can be used. Should be legal in all pinewood derby races.

Add your own LEGO pieces to make a car.

Extended Wheelbase Pinewood Derby Cars

Same dimensions as standard cars but the axle slots have been moved closer to the ends of the block. This lets you place weights farther back on the car and making the car faster. Extended wheelbase cars are not legal in all races. Check your rules.

Pick Up Truck

2.3 - 2.9 oz
see close up

OUT OF STOCK

Racer

2.0 - 2.6 oz
see close up

High Quality Blocks
With precision cut axle slots

These blocks are 1 1/4" high - ideal for low aerodynamic cars
Our standard wheel spacing block is legal in all races. Check your rules to see if extended wheel spacing is allowed.
Wheels and axles not included

Racer

2.0 - 2.6 oz

Standard Wheel Spacing

OUT OF STOCK

Extended Wheel Spacing

Precision Drilled Blocks --- For the Serious Racer

Why you should use blocks with axle holes
Wheels and axles not included

Wedge

2.0 - 2.6 oz

Standard Wheelbase

Standard Spacing

Standard Spacing
one raised wheel

Extended Wheelbase

Extended Spacing

OUT OF STOCK

Extended Spacing
one raised wheel

Racer

2.0 - 2.6 oz

Standard Wheelbase

Standard Spacing

OUT OF STOCK

Standard Spacing
one raised wheel

OUT OF STOCK

Extended Wheelbase

Extended Spacing

OUT OF STOCK

Pre-painted and Completed Cars

All official BSA parts are used to make these cars.
Pre-painted cars do not include wheels and axles. Wheels and axles can be purchased separately.
Completed Cars require no preparation - they are ready to race.

All of these cars have been weighted to 5.0 oz.

Painted Car Details Completed Car Details

Wedge - Red

OUT OF STOCK

Wedge - Green

OUT OF STOCK

Python

Lego Cars

Pinewood Derby Races

Make your own Pinewood Derby car with LEGO pieces!

This is an official Pinewood Derby block with a LEGO plate attached to the top. Add your own LEGO pieces to build a car or use one of our LEGO sets.

Parties, Schools, Corporate Events, Summer Camps

Hold your own race using a standard Pinewood Derby track.

Includes frame, axles and wheels. Add your own LEGO pieces to build a car or purchase our LEGO kits.

Unmodified Pinewood Derby Axles

These are the same axles that are supplied in the official pinewood derby kit. Ridges and crimp marks should be removed and the axles polished before they can be raced.

(4 axles per set)

OUT OF STOCK

Polished Axles Official BSA Axles -- The Winning Edge

Four styles to choose from
All of these axles are machine polished to a very fine mirror finish
These axles are ready to race!

Official BSA axles
Polished to a mirror finish
Legal in all races

Polished Axles

(4 axles per set)


	5

OUT OF STOCK

Same as the axle on the left but with graphite coating. Outside of axle head is not coated.

Polished Axles
graphite coated

(4 axles per set)


	19

OUT OF STOCK

Official BSA axles
Polished to a mirror finish
Friction reducer groove
Legal in most races

Polished Grooved Axles

(4 axles per set)


	7

OUT OF STOCK

Same as the axle on the left but with graphite coating. Outside of axle head is not coated

Polished Grooved Axles
graphite coated

(4 axles per set)


	23

OUT OF STOCK

Pre-Bent Polished Axles

Used to easily adjust the alignment of your car or to use the rail riding technique

These axles are bent slightly where the axle exits the block. The steering on your pinewood derby car can be adjusted by rotating the axle while it is in the slot. Two angles are available. 1.5 degree bend is recommended for the front axles and 2.5 degree bend for the rear axles. These are sold as single axles. Instructions on using our Pre-Bent Axles

Polished Axle

OUT OF STOCK

Graphite Axle

OUT OF STOCK

Grooved Polished Axle

OUT OF STOCK

Graphite Grooved Axle

OUT OF STOCK

Axle Pliers

Car alignment can be adjusted by rotating the bent axle while it is in the block. Our Axle Pliers are highly recommended for rotating the axles. It will not damage the axle head like pliers can.

OUT OF STOCK

Axle Accessories

Axle Drill Bit

#44 (.086" diameter)

This drill bit has a slightly smaller diameter than the official BSA axle (and our speed axles).

This hard-to-find bit is just what you need for drilling new axle holes or for aligning the existing axle slots in your car block.

OUT OF STOCK

Axle Keeper

Makes installing your axles easier and protects the axles.
Set of two. Includes instructions.

OUT OF STOCK

Graphite Pads

Provides a low friction contact point between the wheel and car body.


	7

OUT OF STOCK

Axle Polishing Supplies

Needle File

Use a needle file to remove burrs and crimp marks from your axles.

OUT OF STOCK

Axle Polishing Kit

Used to remove burrs and crimp marks and final polishing.
Includes instructions

OUT OF STOCK

This kit includes:

File
Two stripes of #400 sandpaper
Two stripes of #1200 sandpaper
Axle Polish
Instructions

Axle Sandpaper

Four pre-cut strips
Instructions included

OUT OF STOCK

Four 4 1/2" strips of sandpaper pre-cut to the proper width for polishing axles.

Includes 2 strips of #400 and 2 strips of the hard-to-find #1200 paper.

Enough to prepare 2 sets of axles.

Use our Secret Formula Axle Polish to give your axles a final polishing.

Axle Polish for Pinewood Derby Cars

Final Step Axle Polish
Secret Formula

For use as a final polish on our Speed Axles and other axles with a smooth finish

OUT OF STOCK

Our Secret formula axle polish takes polish technology to a whole new level. The result is superior to any other polish available.

This polish is an easy to use paste and takes only a few minutes to apply.

Each kit has enough polish for several sets of axles

Polishing rag not included

Wheels

Some of our wheels are now available in red, orange and yellow.
These are still official BSA wheels and are the same as our black wheels.
Only the color is different.

Unmodified Pinewood Derby Wheels and Axles

Official BSA Wheels and Axles

Replacement Official BSA wheels and axles.
No changes have been made.

(4 wheels and axles per set)

Black - OUT OF STOCK

Red - OUT OF STOCK

Stock Wheels and Axles

Same dimensions as the official BSA wheels and axles but these high quality components don't require as much preparation as the BSA. Just file the crimp marks off of the axle head and you are all set. May not be legal in official BSA races.

(4 wheels and axles per set)

OUT OF STOCK

Premium Wheels

Unmodified official Pinewood Derby wheels selected for maximum speed

Our Premium Wheels are unmodified official Pinewood Derby wheels that have been hand selected for high performance. These wheels are:

Selected from molds that have demonstrated higher performance
Round within .004"
Don't wobble
Roll straight
Diameter for all four wheels in a set are within .002" of each other
We also clean the wheel bore

Only 1 out of 20 wheels inspected meet our requirements for a Premium Wheel.

These wheels are legal in all races!

Premium BSA Wheels


	6

(4 wheels per set)

Black - OUT OF STOCK
Red - OUT OF STOCK

Premium BSA Wheels
with Graphite Coating


	8

(4 wheels per set)

Graphite coating may not be legal in
all races - check your rules.

OUT OF STOCK

What is
	??

Custom Official Pinewood Derby Wheels

The fastest wheels possible for your race

Your local race rules may restrict the kinds of modifications that can be made to your wheels. Here you can select the modifications that are allowed by your rules. The result will be the fastest possible wheels for your race. In general, the more modifications that you select, the faster your car.

Wheel Color

Select from four different colors. The graphite coating option is only available with black wheels.

black

red

orange

Matched Wheels

Several different molds are used to make the wheels. Wheels from the same mold have the same characteristics. Your car will be a little faster if all four wheels are from the same mold. The mold number is on the inside of the wheel.

Click here to see if matched wheels are legal in your race.

Matched set

Domed Outer Hub

The axle head rides on a step on the outer hub of the wheel. This step causes extra friction because the wheel is in contact with the outer part of the axle head where the distance traveled for each rotation is greater. A domed hub moves the contact point to the inside of the axle head, reducing friction.

Do not use if your rules state that the outer hub
cannot be modified. (we do not modify the inner hub)

Domed outer hub

Smooth Wheel Tread

High spots on the wheel tread will cause your car to bounce as it goes down the track causing friction. Our lightly sanded wheels removes the high spots eliminating most of the bounce. Even with the high spots removed, the wheel is slightly oval shaped. Our lathed wheels removes the oval and makes the wheels round to within .001".
Click here to see if lightly sanded wheels are legal in your race.

Click here to see if lathed wheels are legal in your race.

None

Lightly sanded

Lathed

Graphite Coating

Our special bonding process coats the friction areas of the wheel with a thin coat of graphite. This graphite will last many races giving you an edge over cars with loose graphite. Our tests have shown no reduction in speed after more than 20 races! The areas of the wheel coated with graphite have a dark gray color slightly different than the color of the wheel.

Not legal in races that specify that wheels cannot be impregnated with graphite or Graphite cannot be bonded to the wheels.

Graphite coating

Speed


	0

This speed rating shows the number of inches that your car will gain at the finish line for the wheel that you specified.

Price

1.95

for a set of 4 wheels (axles not included)

Quantity

sets of wheels

To order different sets of wheels, add the first set into the shopping cart then return to this page to add additional sets.

Outlaw "Razor" Wheels

These ultra thin wheels are very fast but they are illegal in most official races.
They are intended for "unlimited", "open division" and similar races.

These wheels feature our exclusive Inner Strip that reduces friction and improves speed. They have perfect balance and they are machined from Delrin to exacting tolerances. These wheels are ready to race. Just add your choice of lubricant.


	22

Razor RS Wheels

Weight is only 1g.

4 wheels per set
Axles included
Not for use with grooved axles

OUT OF STOCK


	24

Razor RSX Wheels

This is our RS Wheel with holes added to make it lighter. The weight is only .9g. A very fast wheel.

4 wheels per set
Axles included
Not for use with grooved axles

OUT OF STOCK

RSN Wheels


	26

Small Diameter Axle "RSN" Wheels

The same as our RS Wheel but this wheel uses a .035” diameter needle axle (included). If aligned correctly, you will see a substantial speed increase over our standard “RS” wheel. Only experienced builders should use this wheel due to the small axle size and the small drill bits used. Krytox or other liquid lubricants are recommended for this wheel.

Includes 4 wheels, 6 Axles and 2 drill bits

OUT OF STOCK

RSN-X Wheels


	27

Small Diameter Axle "RSN-X" Wheels

This is the same as our RSX wheels but with the non-standard thin axles. This is our fastest wheel!

Includes 4 wheels, 6 Axles and 2 drill bits

OUT OF STOCK

Replacement Small Diameter (Needle) Axles and Drill Bits

For use on the Outlaw RSN and RSN-X Wheels

Small Diameter Axle

OUT OF STOCK

1/32" Drill Bit

OUT OF STOCK

Wheel Accessories

Axle Installer

OUT OF STOCK

Our axle installer makes it easy to install wheels and axles on your Pinewood Derby car the right way every time.

Not for Awana wheels and axles

Wheels and Axles for Awana™ Races

Click here for our Awana Wheels and Axles

Lubricant -- The Hidden Secret

Finally, lubricants made for Pinewood Derby Cars!!

Graphite

Special formula ideal for
Pinewood Derby cars

A special graphite blend clings to wheels and axles. The best pure graphite available


	28

OUT OF STOCK

Krytox 100

1/4 oz

A synthetic oil that outperforms dry lubricants. Ultra-low viscosity properties.


	34

OUT OF STOCK

Cylinder Weights

Cylinders are typically inserted in your car by drilling one or more holes in the back, bottom or side of the car then the holes are sealed with wood putty.

Lead Wire Weights

These weights are made from lead. This makes them dense and easy to work with but lead is toxic and should be installed inside your car. It is best to use gloves when handling lead. Each weight is 1/4" diameter and can be easily cut to any length. To install, drill one or more 9/32 " holes in the back, bottom or side of your car, insert the weights in the holes then glue them into place or cover with wood putty.

The package comes with 3 sections for a total of 3 oz.

These are lead weights and
should not be handled by children.

How To Add Wire Weights To Your Car

Wire Weights - OUT OF STOCK

Fine Tune Steel Cylinders

Each steel cylinder is 1/4" diameter and weighs 1/10 oz and is 1/2" long. The package comes with ten cylinders for a total of 1 oz.

Install these weights by drilling 9/32" holes in the back or bottom of your car,
insert the weights in the holes then cover with wood putty.

How To Add Steel Cylinders To Your Car

OUT OF STOCK

9/32" drill bit for use with Lead Wire Weights and Fine Tune Steel Cylinders

Drill Bit - OUT OF STOCK

3/8" Steel Cylinders

Each of these steel cylinders is 3/8" diameter by one inch long and weighs 1/2 oz. Sold in sets of two for a total of 1 oz..

Use a 3/8" drill bit to install these weights in your pinewood derby car. Seal with wood putty.

OUT OF STOCK

3/8" Zinc Cylinders

3/8" diameter by 2 3/4 inch long. Each of these Zinc Cylinders weighs 1 oz. Sold in sets of three for a total of 3 oz.. Can be cut with a hacksaw to modify the weight. To install, drill 3/8" holes in the back, bottom or side of your car and seal with wood putty.

OUT OF STOCK

A 13/32 or 7/16 drill bit should be used to drill holes for these cylinders

Tungsten Cylinders

3/8" diameter cylinders

1/2 oz - OUT OF STOCK
1/8 oz - OUT OF STOCK

5/16" drill bit for use with Tungsten Rods

Drill Bit - OUT OF STOCK

EZ Cut Tungsten Cylinders

Easy to cut and sand
Two pieces. Each is 1 oz - 3/8" diameter X 1 1/2" long
3/8" drill bit and glue or wood putty required

How to use our EZ Cut Tungsten Weights

OUT OF STOCK

Fine Tune Cylinder

Cut this composit cylinder to any length to fine tune the weight of your car. Fits in the same holes as the above steel and tungsten cylinders.

3/8" diameter - 2 1/4" long - 0.8 oz.

OUT OF STOCK

Flat Weights

Use supper glue to attach our Flat Weights to the top, side or bottom of your car. If attached to the bottom, they should be recessed into the wood to provide enough track clearance.

Zinc Stick-On Weights

These 18 individual weights work great for fine tuning the weight of your Pinewood Derby car. They have an adhesive backing so it is very easy to attach them to your car.

Includes:
10: 3/4 "X 1/2" X 1/8" .13 oz weights
8: 3/8" X 1/2" X 1/8" .06 oz weights
1.78 oz. total weight

Zinc is more dense than steel but not as dense as lead and tungsten.

OUT OF STOCK

Bottom Weights

This steel weight is less than 1/16" thick so it can be attached to the bottom of the car and still leave the 3/8" minimum clearance specified in most rules. The weight can be adjusted in .02 oz increments by breaking off segments with pliers.

More Information on Pinewood Derby Bottom Weights

OUT OF STOCK

Tungsten Cubes Weights

These small tungsten cubes can be added to various areas of your pinewood derby car. Drill a hole or cut a slot then seal with wood putty.

Seven .07 oz cubes

Dimension: 3/16" X 3/16" X 3/16"
Total weight = .5 oz

OUT OF STOCK

Slotted Tungsten Disc

Our slotted discs can be ordered with two tungsten cubes. The cubes fit in the slot and are used to fine tune your weight. Each cube adds .17 oz to the weight.

These discs have a slot on the bottom of the disc. The slot can be used to:

Provide clearance for the axles when the disc is mounted low in the block.
Adjust the center of gravity of the car by rotating the disc.
Fine tune the weight of your car by adding tungsten cubes in the slot.

Learn more about how to use slotted discs.

(height is depth of hole that should be drilled)

Domed Slotted Tungsten Disc

Dimension: 1" diameter x 3/8" high
Height is depth of hole that should be drilled.

Also available with two tungsten cubes. The cubes can be placed in the slot to add up to 1/3 oz.

3.75 oz OUT OF STOCK

1" Forstner Bit

For drilling holes for our Slotted Tungsten Discs
Fits any 3/8" or larger drill.

OUT OF STOCK

Tungsten Dome Canopy

This smooth tungsten canopy has a stud for mounting to your car. Drill a 1/4" deep hole on a flat surface of your car then super glue the weight to your car.

Two sizes

2.5 oz: 1 1/2" long X 1" wide X 1/4" tall, 3/8" stud
3.5 oz: 1 3/4" long X 1 1/4" wide X 1/4" tall, 1/2" stud
Stud is 1/4" long on both sizes
How to add a dome canopy to your car

2.5 oz SILVER OUT OF STOCK

3.5 oz SILVER OUT OF STOCK

2.5 oz GOLD OUT OF STOCK

3.5 oz GOLD OUT OF STOCK

2.5 oz BLACK OUT OF STOCK

3.5 oz BLACK OUT OF STOCK

Aerodynamic Zinc Weight

Great for wedge shaped cars with a flat top. It is sleek and tapered for minimal wind drag.

Includes four mounting screws
1 1/2" W X 3 1/4" L
2.2 oz. total weight

OUT OF STOCK

Tungsten Putty

Can be added to a hole or slot on your car. Use just the amount that you need.

1 oz total weight.

OUT OF STOCK

Accessories

Super Glue

Use this Super Glue to
attach weights to your car.

OUT OF STOCK

Wheel Decals

Your car will stand out from the crowd with these easy to apply wheel decals.
For Pinewood Derby wheels only. Does not fit AWANA wheels
More Information
Only $2.95 for each set of 4

Mag Wheel 1

OUT OF STOCK

Mag Wheel 2

OUT OF STOCK

Mag Wheel 3

OUT OF STOCK

Mag Wheel 4

OUT OF STOCK

Army Wheel

OUT OF STOCK

Flame Points

OUT OF STOCK

Blue Flame

OUT OF STOCK

Star Bullseye

OUT OF STOCK

Red Metallic

OUT OF STOCK

Spokes

OUT OF STOCK

Blades

OUT OF STOCK

Sunburst

OUT OF STOCK

Orange Saw

OUT OF STOCK

Kaleidoscope

OUT OF STOCK

Red Starburst

OUT OF STOCK

Hypnotic

OUT OF STOCK

Stick On Decals

Very Easy to apply. Peel off of the sheet and stick onto your car.
DO NOT USE LAQUER CLEAR PAINTS OVER THESE DECALS.
USE THE GLOSS CLEAR THAT WE OFFER OR A CLEAR ACRYLIC PAINT.

Yellow Flames

OUT OF STOCK

Comet

OUT OF STOCK

Pirate

OUT OF STOCK

NASCAR

OUT OF STOCK

Police
Emergency

OUT OF STOCK

For Girls Only

OUT OF STOCK

Car Body Skins

Add the look of a customized paint job to your car
Easy application

Spider Web

Lightning Strikes

OUT OF STOCK

Safari

OUT OF STOCK

Accessories for Wedge Shaped Cars

Turn your wedge shaped car from

this

and many other designs with our plastic accessories.
See more design examples

Spoiler

1 1/2" L X 1 3/4" W
.15 oz

OUT OF STOCK

Cockpit

3" L X 1 3/4" W
.26 oz

OUT OF STOCK

Fin

3 1/2" L X 1 1/8" W
.18 oz

OUT OF STOCK

Scoop

1" L X 5/8" W
.03 oz

OUT OF STOCK

Hood

1 5/8" L X 1" W
.06 oz

OUT OF STOCK

Headlights

1 1/2" L X 1/4" W
.08 oz

OUT OF STOCK

Missiles

2 1/8" L X 1/4" W
.05 oz

OUT OF STOCK

Pinewood Derby Car Accessories

Just what your car needs to stand out.
Paint to match your car or polish for a chrome like finish.

Accessories #2

Includes:
Engine
Exhaust Pipes
Spoiler

OUT OF STOCK

Accessories #3

Includes:
Engine
Exhaust Pipes
Roll Bar
Driver's Head
Windshield

OUT OF STOCK

Accessories #4

Includes:
Driver
Steering Wheel
Roll Bar
Seat back
Black Vinyl for Windshield

OUT OF STOCK

Police Light Bar

Turn just about any car into a police car or emergency vehicle.

OUT OF STOCK

Animal Cars

How To Glue These Animal Figures To Your Car

Chimp

Weight: .9 oz
Height: 2"
Base: 1 1/4" X 2"
Overall Length: 2 1/2"

OUT OF STOCK

Tiger

Weight: .2 1/2 oz
Height: 2 3/8"
Base: 1 1/4" X 3 1/2"
Overall Length: 5 1/2"

OUT OF STOCK

Triceratops

Weight: 2.2 oz
Height: 2 1/8"
Base: 1 1/2" X 2 1/4"
Overall Length: 4 3/4"

OUT OF STOCK

Car Eyes

They Wiggle!

These plastic oval eyes can be rotated to give different expressions.

Large Eyes

3/4 inch

OUT OF STOCK

Small Eyes

1/2 inch

OUT OF STOCK

Super Glue

OUT OF STOCK

Super Glue is recommended for attaching accessories to your car.

Pinewood Derby Car Paint

Specially selected to give the best results
Water based * Non-toxic * High Gloss
More Details

White

OUT OF STOCK

Kandy Scarlet

OUT OF STOCK

Pink

OUT OF STOCK

Red

OUT OF STOCK

Int. Orange

OUT OF STOCK

Orange

OUT OF STOCK

Yellow

OUT OF STOCK

Green

OUT OF STOCK

Park Green

OUT OF STOCK

Light Green

OUT OF STOCK

Sky Blue

OUT OF STOCK

Paint Markers

Great for details such as windows, lights, wheels, bumpers and designs
Easy to use - non-toxic

Use our silver marker to paint chrome spokes

Black

OUT OF STOCK

Red

OUT OF STOCK

Silver

OUT OF STOCK

Pinewood Derby Car Building Supplies

Everything you need to finish your car

Paint Brush

This 1/2" wide brush is just right for painting your Pinewood Derby car.

OUT OF STOCK

Sandpaper

Three 4" X 5" sheets

Ideal for sanding your
Pinewood Derby car.

OUT OF STOCK

Body Putty

Includes spatula
This product is non-toxic

Ideal for

Filling scratches, cuts, gaps and rasp marks.
Adding fins, spoilers, bumps and other features to your car.
An all-over smooth finish.

OUT OF STOCK

Super Glue

Bonds to almost anything. Sets in seconds.

Ideal for attaching accessories, parts and weights to your car.

OUT OF STOCK

Glue

Dries clear
This product is non-toxic

Ideal for

Attaching axles to your car.
Repairing chips and cracks on your car.

OUT OF STOCK

Pinewood Derby Tools

Pro-Body Tool

For BSA, PineCar, and other kits
with nail axles

#44 drill bit included

OUT OF STOCK

The Pro-Body tool is a precision-machined device that will improve the speed of your Pinewood Derby cars through accurate axle hole drilling. The Pro-Body Tool:

Ensures accurate axle positioning by allowing you to drill accurate axle guide holes into the existing axle slots with a hand drill! The guide holes ensure that the axles are mounted square and true on the car. Improved axle mounting accuracy equals greater speed!
For races which allow axle holes, the Pro-Body tool serves as a guide for drilling accurate holes with a hand drill. Again, improved axle mounting accuracy equals greater speed!

Pro-Hub Tool

Sandpaper included

OUT OF STOCK

The Pro-Hub tool performs two important wheel improvements:

Hub Squaring - Ensures accurate rotation by squaring the wheel hub to the wheel bore.
Bore Reaming - Some wheels are manufactured with a wheel bore that is too small to fit a wheel mandrel. This tool ensures proper axle fit by reaming undersized wheel bores.

Wheels Shaver Replacement Blade

Pro-Wheel Shaver XT
and Pro-Hub Tool

OUT OF STOCK

Pro-Wheel Shaver XT

(Pro-Hub Tool Required)

OUT OF STOCK

Replacement Shaver Blade

OUT OF STOCK

Shave Time Off Of Your
Pinewood Derby Runs

Now with with Screw-adjustable Blade Depth!

Use the Pro Wheel Shaver to remove high spots and other imperfections from your wheel and make the wheel rounder .

(The Pro-Hub tool is required to use the Pro-Wheel Shaver).

These blades can be sharpened with a silica honing stone or equivalent. The tip of the blade should be sharpened to a 5 to 7 deg. angle. Pull the blade towards you on the stone applying slight pressure. Use WD 40 as a lube for the stone.

Pro-Hub Shaver
and Pro-Hub Tool

OUT OF STOCK

Pro-Hub Shaver

(Pro-Hub Tool Required)

OUT OF STOCK

The Pro-Hub shaver reduces friction between the axle head and wheel by:

Removes excess plastic remaining around the wheel's outer hub after the molding process.
Squares the outer hub with the wheel bore creating a smooth surface.
Removes the hub step on the new style wheels.

(The Pro-Hub tool is required to use the Pro-Hub Shaver).

Pro-Wheel Mandrel

OUT OF STOCK

The easiest way to make your Pinewood Derby car wheels perfectly round and smooth is to mount each wheel on our mandrel then use a drill to spin the wheel while holding it lightly against a sandpaper block. Benefits include:

Easy grip screw does not require tools to mount the wheels.
Step cut allows for reverse mounting of the wheel (for polishing the inner edge.
Centering cone provides perfect wheel centering on the mandrel.

Pro-Bore Polisher

OUT OF STOCK

The Pro-Bore Polisher will improve the speed of your car by reducing friction inside the wheel bore.

Eliminates plastic debris and minimizes flaws inside the wheel bore
Polishes the wheel bore to a high shine

Pro-Bore Wax

OUT OF STOCK

Wheel Bore waxing can give your pinewood derby car a significant speed increase. It leaves a very slick finish inside the wheel bore that reduces friction. The bore should be polished using our Pro-Bore Polisher before applying the Bore Wax.

Works well with graphite and liquid lubricants.

Axle Installer

OUT OF STOCK

If your Pinewood car uses slots for the axles, our Axle Installer is for you! It makes it very easy to insert the axles into the slot at the right depth and height and makes sure that the axle is horizontal.

For use on cars that use 4 axles mounted in slots.

Axle Guide

OUT OF STOCK

The Axle Guide has the same purpose as the Axle Installer but it is better suited for applications where many wheels need to be installed. It uses a built-in feeler gauge for setting the gap between the wheel and car body.

Axle Puller

OUT OF STOCK

Our axle puller is the easy way to remove axles from your car without damaging the axle or the wheel.

Not for Awana wheels and axles

Axle Pliers

OUT OF STOCK

Custom pliers designed to safely handle pinewood derby and Awana axles. Can be used to remove the axle from the block or twist the axle to adjust wheel alignment

Feeler Gauge

OUT OF STOCK

This stainless steel feeler gauge is ideal for setting correct distance between the wheel hub and car.

This rasp is used to shape the block after it has been cut with a saw. Rasps are also great for rounding sharp corners and cutting groves into the wood. Rasps have rough teeth that can quickly remove a lot of wood. After you use a rasp, a file or sandpaper can be used to smooth the block.

Wood Rasp

Sold as a set of two rasps, one is flat and the other is half round.

OUT OF STOCK

Other Items

5 oz Reference Weight

This 5 oz. weight is accurate to .0002 oz.
It can be used to check the accuracy of your scale or to weigh your car if you are using a balance scale.
This product contains lead. Please Wash your hands after using.

OUT OF STOCK

Pinewood Racer Board Game

Pinewood Derby Excitement in a Board Game

This game of skill mimics the thrill of a real Pinewood Derby race.
Includes board, cards and player pieces.

2 to 4 players
Age 6 to adult

OUT OF STOCK

To place your order:

1. Enter the quantity you would like to order next to each of the above items.
2. Click the "Add to Cart" button below.

Awana is a Registered Trademark of Awana Clubs International

Our Pinewood Derby Store has all the products that you need to build a fast Pinewood Derby car.

Order on Pinewood Pro

Order these items now from Pinewood Pro!

LEGO Brick Derby Products

Books and Videos Download

Pinewood Derby Speed Secrets

Pinewood Derby Speed Secrets

Pinewood Derby Car Designs Download

THE SPIDER

POLICE CAR

GREEN HORNET

MAGNUM

STARFIGHTER

PYTHON

Books and Videos

Building the Fastest Pinewood Derby Car Book

Down and Derby movie on DVD

Pre-Cut Pinewood Derby Cars

Terminator

LEGO Cars

Extended Wheelbase Pinewood Derby Cars

Pick Up Truck

Racer

High Quality Blocks With precision cut axle slots

Racer

Standard Wheel Spacing

Extended Wheel Spacing

Precision Drilled Blocks --- For the Serious Racer

Wedge

Standard Spacing

Standard Spacing one raised wheel

Extended Spacing

Extended Spacing one raised wheel

Racer

Standard Spacing

Standard Spacing one raised wheel

Extended Spacing

Pre-painted and Completed Cars

Wedge - Red

Wedge - Green

Python

Lego Cars

Pinewood Derby Races

Parties, Schools, Corporate Events, Summer Camps

Unmodified Pinewood Derby Axles

Polished Axles Official BSA Axles -- The Winning Edge

Polished Axles

Polished Axles graphite coated

Polished Grooved Axles

Polished Grooved Axles graphite coated

Pre-Bent Polished Axles

Polished Axle

Graphite Axle

Grooved Polished Axle

Graphite Grooved Axle

Axle Pliers

Axle Accessories

Axle Drill Bit

Axle Keeper

Graphite Pads

Axle Polishing Supplies

Needle File

Axle Polishing Kit

Axle Sandpaper

Final Step Axle Polish Secret Formula

Wheels

Unmodified Pinewood Derby Wheels and Axles

Official BSA Wheels and Axles

Stock Wheels and Axles

Premium Wheels

Premium BSA Wheels

Premium BSA Wheels with Graphite Coating

Custom Official Pinewood Derby Wheels

Outlaw "Razor" Wheels

Razor RS Wheels

Razor RSX Wheels

Small Diameter Axle "RSN" Wheels

Small Diameter Axle "RSN-X" Wheels

Replacement Small Diameter (Needle) Axles and Drill Bits

Small Diameter Axle

High Quality Blocks
With precision cut axle slots

Standard Spacing
one raised wheel

Extended Spacing
one raised wheel

Standard Spacing
one raised wheel

Polished Axles
graphite coated

Polished Grooved Axles
graphite coated

Final Step Axle Polish
Secret Formula

Premium BSA Wheels
with Graphite Coating

Police
Emergency